High yielding synthesis of 3a-hydroxypyrrolo[2,3-b]indoline dipeptide methyl esters: synthons for expedient introduction of the hydroxypyrroloindoline moiety into larger peptide-based natural products and for the creation of tryptathionine bridges

This work describes a rapid and high yielding oxidation of 14 tryptophanylated amino acid methyl esters to the corresponding 3a-hydroxypyrrolo[2,3-b]indoline (Hpi) amino acids with generally facile separation of syn-cis and anti-cis diastereomers. Structural X-ray diffraction data are presented for both diastereomers of Tr-Hpi-Gly-OMe, which allow for a putative assignment of the other 13 pairs of diastereomers reported herein, based on correlations with 1H NMR chemical shifts. Selective and high yielding deprotection at either the N or C terminus is described, allowing the Hpi motif to be introduced efficiently into potential targets with minimal protecting group manipulation. Two tripeptides containing Hpi and cysteine were prepared and treated with acid in the Savige-Fontana reaction to produce a cyclic tryptathionine linkage, characteristic of both amatoxins and phallotoxins.     

The effect of engineered disulfide bonds on the stability of Drosophila melanogaster acetylcholinesterase

Background  

Acetylcholinesterase is irreversibly inhibited by organophosphate and carbamate insecticides allowing its use in biosensors for detection of these insecticides. Drosophila acetylcholinesterase is the most sensitive enzyme known and has been improved by in vitro mutagenesis. However, its stability has to be improved for extensive utilization.     

Synthesis of 2-oxo and 2-thioxo-3(2H)-benzothiazoleethanimic acid anhydride with acetic acid and related products

The reaction of the appropriate 2-benzothiazolinone with 2-chloroacetamide under basic conditions afforded the 2-oxo-3(2H)-benzothiazolineacetamides 6–9. The 2-thioxo-3(2H)-benzothiazolineacetamide ( 10 ) was prepared by the reaction of 3-(carbethoxymethyl)benzothiazoline-2-thione with ammonium hydroxide. The reaction of acetamides 6–10 with the appropriate anhydride containing a catalytic amount of the sodium salt of the acid corresponding to the anhydride afforded the titled compounds 11–18 in excellent yields. The omission of the catalyst in the same reaction furnished a mixture containing 57% of the titled compound, 37% of the nitrile and 6% of an unknown. Possible mechanism and supporting nmr, ir and mass spectral data are discussed.     

Bonding of acetylene to copper atom,dimer, and trimer

The bonding of acetylene to copper atom, dimer, and trimer was investigated with a Kohn–Sham density functional approach. Full geometry optimization yielded the equilibrium structures of various Cu_nC₂H₂ species. Gradient corrections were included in the calculation of binding energies (BE ). The Cu—C₂H₂ complex was found to have a C_s structure and a BE of 10 kcal/mol. Three isomers of Cu₂C₂H₂ have similar total energies: a C_2v end-bonded structure with a BE of 18 kcal/mol, and two 1,2-dicupro ethylene isomers—a cis form with a BE of 12 kcal/mol and a trans form with a BE of 15 kcal/mol. Two stable C_2v isomers of Cu₃C₂H₂ were found. In both isomers, the Cu₃ ring relaxes from its isosceles structure, with two short bonds (2.247 Å) and one long bond (2.478 Å), and adopts a nearly equilateral geometry. In one isomer of Cu₃C₂H₂, the acetylene is bonded to one apex of the Cu₃ ring with a BE of 29 kcal/mol. In the other, it is bonded to two copper atoms of one side of the Cu₃ ring with a BE of 33 kcal/mol. © 1994 John Wiley & Sons, Inc.     

Modeling of the adsorption behavior and the chromatographic band profiles of enantiomers : Behavior of methyl mandelate on immobilized cellulose

The adsorption isotherms of (−)- and (+)-methyl mandelate from a hexane-isopropanol (90:10) solution were measured on a chromatographic column packed with 4-methylcellulose tribenzoate coated on silica. These isotherms are accounted for by a bi-Langmuir isotherm model, the two Langmuir terms having widely different initial slopes and saturation capacities, but each term having the same saturation capacity for the two enantiomers. The competitive isotherms were also measured. They are in excellent agreement with the prediction of a competitive bi-Langmuir model based on the single-component isotherms. The individual band profiles are in agreement with the profiles calculated from these isotherms. Thus, a simplified competitive isotherm can be used to model a separation on a chiral stationary phase the recognition mechanism of which is not well identified and the adsorption behavior of which is certainly not ideal.     

Elastic π±-d and π±-4He scattering below 70 MeV

Elastic scattering differential cross section data of ^± d at 65 MeV and ^{± 4}He at 51 MeV are presented and compared respectively to fully relativistic 3-body and optical potential calculations including true pion absorption.Presented at the symposium Mesons and Light Nuclei, Liblice, Czechoslovakia, June 1981.     

Base-assisted intramolecular 6-acetoxypyranone-acetylene [5+2] cycloaddition. Synthesis and reactivity of novel oxa-tricyclo[5.3.1.0]undecenones

The synthesis of 3,11-dioxatricyclo[5.3.1.0^1,5]undeca-5,9-dien-8-ones is reported from suitable 5-substituted furfuryl alcohols bearing an acetylenic side-chain. Successive peracid-mediated oxidative rearrangement of furan carbinols and base-assisted intramolecular 1,3-dipolar cycloaddition afforded oxygen-bridged tricyclo-undecane derivatives. Stereoselective transformations of cycloadducts are also discussed.     

Study of metal complexes of a tripodal hydroxypyridinone ligand by electrospray tandem mass spectrometry

The tripodal ligand N,N,N-tris[(1,hydroxy-2-pyridinon-6-yl)amide]propylamine was synthesized. It is composed of an anchor (nitrogen atom), a functional group (hydroxamate), and also a spacer of variable length defined by the number of methylene groups linking the anchor and the functional group. The characterization of this ligand in the presence of several divalent metal cations (Fe(II), Mn(II), Co(II) and Cu(II)), performed by electrospray ionization mass spectrometry (ESI-MS and ESI-MS/MS), allowed elucidation of oxidation states and also of different fragmentation patterns. The importance of the spacer length was studied in the case of the iron binary complex by comparing this ligand with another with a shorter spacer. In this way the stabilizing conditions, in which hydrogen bonds are implicated, were clarified.     

Modelling of GC and HPLC separations of simazin and atrazin by experimental design methodology

Summary Experimental Design methodology allows the modelling and optimization of the chromatographic separation of similar pesticides (triazine family) by GC and HPLC. The GC separation of simazin and atrazin is well modelled by a first degree equation, involving injected volume, carrier gas pressure and rising oven temperature. The LC is modelled by a second degree equation, depending on injected volume, eluent flow and composition. These calculated models allow easy optimization of the separations, using isoresponse curves.     

Electrochemical Properties and ESR Characterization of Mixed Valence alpha-[XMo(3)(-)(x)()V(x)()W(9)O(40)](n)()(-) Heteropolyanions with X = P(V) and Si(IV), x = 1, 2, or 3

Electrochemical behavior of the alpha-[SiMo(3)(-)(x)()V(x)()W(9)O(40)]((4+)(x)()())(-) and alpha-[PMo(3)(-)(x)()V(x)()W(9)O(40)]((3+)(x)()())(-) anions with x = 1, 2, or 3 were studied. Electrochemical reduction of each compounds was consistent with its Mo/V ratio, reduction of vanadium and molybdenum atoms occurring in the +0.6 to -0.6 V potential range. The one-electron-reduced species were prepared by electrolysis and then characterized by ESR spectroscopy. The g and A values for V(4+)ions appeared to depend on the nature of the surrounding atoms (Mo(VI), W(VI), and V(V)). In solution at 330 K, the ESR spectrum of the protonated alpha-H[SiMoV(IV)VW(9)O(40)](6)(-) anion displayed 29 superhyperfine lines which were related to the partial localization of the electron on one vanadium nucleus. The ESR spectra at room temperature for the divanadium-substituted anions showed a strong anisotropy of the A tensor which would be related to the electron transfer along a preferential axis. An isolated V(4+) signal was not observed, even at 12 K, indicating that the electron is never firmly trapped on one single vanadium atom.